Draper CS14A Manuel du propriétaire télécharger pdf

350mm CHOP SAW

■ STOCK No.55809 (110V) ■ PART No.CS14A

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE

SAFE AND EFFECTIVE USE OF THIS TOOL.

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which

should be kept with the machine.

This manual describes the purpose for which this tool has been designed and contains all the necessary

information to ensure its correct and safe use.We recommend that this manual is read before any operation of

the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By

following all the general safety instructions contained in this manual, it will ensure both machine and operator

safety, together with longer life of the tool itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

machine.

Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool

policy of continuous improvement determines the right to make modifications without prior warning.

04/2001

52623 (230V)

1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - 350mm CHOP SAW

350mm CHOP SAW STOCK No.55809 (110V) PART No.CS14A• INSTRUCTIONS •IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THESAFE AND EFFECTI

Page 2 - CONTENTS:

- 9 -AFTER EACH USE:Disconnect the plug from the power supply. Remove the disc and flanges.Wipe deposits of dustfrom the housing and guard. Check oper

Page 3 - GUARANTEE

- 10 -TROUBLESHOOTINGMotor does notstart.1. Fuse.2. Brushes warn.3. Other.TroubleProbable Cause Remedy1. 13 amp time delay fuse orcircuit breaker.2. S

Page 4 - POWER SUPPLY

DRAPER TOOLS LIMITED,Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. U.K.Helpline: (023) 8049 4344.Sales Desk: (023) 8049 4333.General

Page 5 - FOR POWER TOOLS

CHOP SAW STOCK No.55809 (110V). PART No.CS14A52623 (240V).CONTENTS:Page No.Contents/Declaration ...

Page 6 - SAFETY RULES FOR CHOP SAWS

- 2 -The Draper Tools policy of continuous improvement determines the right to change specificationwithout notice.Part No...

Page 7 - CHOP SAW

- 3 -7.5M15M22.5M30M45M0.750.750.750.750.750.750.750.750.751.251.01.01.01.251.51.251.51.51.52.5Wire Size mm2Extension cable lengthAmpere rating(on Nam

Page 8 - OPERATION & USE

- 4 -GENERAL SAFETY INSTRUCTIONSFOR POWER TOOLS1. KNOW YOUR POWER TOOLRead and understand the owner's manual and labelsaffixed to the tool. Lear

Page 9

SAFETY RULES FOR CHOP SAWS- 5 -1. WARNING: Do not operate your abrasivecut-off saw until it is completely assembledand installed according to the ins

Page 10 - WIRING DIAGRAM

- 6 -GETTING TO KNOW YOURCHOP SAW1. Trigger locking button2. Trigger3. Transportation handle4. Spindle lock5. Power cord6. Head locking pin7. Hex wren

Page 11 - TROUBLESHOOTING

- 7 -OPERATION & USE1. CUTTING HEAD LOCK (Fig.2)When the saw is not in use the lock ✪✌should beused. To release pull the pin out and raise up th

Page 12 - YOUR DRAPER STOCKIST

✳✌✴✌✪✌✵✌OPERATION & USE5 ANGLE CUTING GUIDE (Fig.6)Loosen screw ✳✌with the hexagon wrenchprovided. Adjust fence ✴✌to the required angleand