Draper WTL30 Manuel du propriétaire télécharger pdf (Page 5)

GENERAL SAFETY INSTRUCTIONS

FOR POWER TOOLS

1. KNOW YOUR POWER TOOL

Read and understand the owner's manual and labels affixed

to the tool. Learn its application and limitations as well as

the specific potential hazards peculiar to this tool.

2. KEEP WORK AREA CLEAN

Cluttered areas and benches invite accidents. Floors must

not be slippery due to oil or sawdust.

3. AVOID DANGEROUS ENVIRONMENTS

Do not use power tools in damp or wet locations, or expose

them to rain. Keep work area well lit. Provide adequate

space surrounding the work area. Do not use in

environments with a potentially explosive atmosphere.

4. KEEP CHILDREN AWAY

All visitors should be kept a safe distance from work area.

5. STORED TOOLS

When not being used, all tools should be stored in a dry,

locked cupboard or out of the reach of children.

6. WEAR PROPER CLOTHING

Do not wear loose clothing, neckties or jewellery (rings,

wristwatches) to catch in moving parts. NONSLIP footwear

is recommended. Wear protective hair covering to contain

long hair. Roll long sleeves above the elbow.

7. USE SAFETY GOGGLES (Head Protection)

Wear CE approved safety goggles at all times. Normal

spectacles only have impact resistant lenses, they are NOT

safety glasses. Also, use face or dust mask if application is

dusty and ear protectors (plugs or muffs) during extended

periods of operation.

8. NOISE LEVELS

Some types of machines may have high noise levels when

working. In such cases ear protection must be worn.

9. VIBRATION LEVELS

Hand held power tools produce different vibration levels.

You should always refer to the specifications and relevant

Health and Safety guide.

10. DUST EXTRACTION

If your tool is fitted with a dust extraction fitting, always

ensure that it is connected and being used with a dust

extractor. Vacuum cleaners can be used if suitable for the

material being extracted.

11. PROTECT YOURSELF FROM ELECTRIC SHOCK

When working with power tools, avoid contact with any

earthed items (e.g. pipes, radiators, hobs and

refrigerators, etc.). If you are using a power tool in extreme

conditions (e.g. high humidity or generating metal dust),

always use an RCD (residual current device) at the power

socket.

12. STAY ALERT

Always watch what you are doing and use common sense.

Do not operate a power tool when you are tired or under

the influence of alcohol or drugs.

13. WHEN WORKING OUT OF DOORS

Only use extension leads designed for that purpose.

14. ACCESS TO MAINS SOCKET

If a stationary machine is fitted with a moulded plug and

cable, the machine should not be positioned so that access

to the mains socket is restricted.

15. DISCONNECT POWER TO THE TOOL

When not in use, before servicing and when changing

accessories such as cutters, etc.

16. AVOID ACCIDENTAL STARTING

Make sure the switch is in the OFF position before plugging

the machine into the power supply.

17. NEVER LEAVE MACHINE RUNNING UNATTENDED

Turn power off. Do not leave machine until it comes to a

complete stop.

18. DO NOT ABUSE THE CORD

Never carry the tool by the power cable or pull it from

the socket. Keep the power cable away from heat, oil and

sharp edges.

19. NEVER STAND ON TOOL

Serious injury could occur if the tool is tipped or if the

cutting tool is accidentally contacted. Do not store

materials above or near the tool, so that it is necessary to

stand on the tool to reach them.

20. CHECK DAMAGED PARTS

Check for damage to parts, breakage of parts, mountings

and any other conditions that may affect its operation.

A guard or other part that is damaged should be properly

repaired or replaced.

21. KEEP GUARDS IN PLACE

And in working order.

22. MAINTAIN TOOLS WITH CARE

Keep tools sharp and clean for the best and safest

performance. Follow instructions for lubricating and

changing accessories. All extension cables must be

checked at regular intervals and replaced if damaged.

Always keep the hand grips on the tool clean, dry and free

of oil and grease.

23. USE RECOMMENDED ACCESSORIES

Consult the owners manual for recommended accessories.

Follow the instructions that accompany the accessories.

The use of improper accessories may cause hazards.

24. REMOVE ADJUSTING KEYS AND WRENCHES

Form a habit of checking to see that keys and adjusting

wrenches are removed from the tool before turning it on.

25. SECURE WORK

Use clamps or a vice to hold work. This frees both hands to

operate the tool.

26. DO NOT OVERREACH

Keep proper footing and balance at all times.

27. USE RIGHT TOOL

Do not force the tool or attachment to do a job for which it

was not designed.

28. DO NOT FORCE TOOL

It will do the job better and safer at the rate for which it

was designed.

29. DIRECTION OF FEED

Feed work into a blade or cutter against the direction of

rotation of the blade or cutter only.

30. WHEN DRILLING OR SCREWING INTO WALLS

Always make sure there is no danger of hitting any hidden

power cables, water or gas pipes in the wall.

- 5 -

WARNING

Please read the following instructions carefully, failure to do so could lead to serious personal injury.

IMPORTANT

Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which

it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.

IMPORTANT NOTE

Residual Risk. Although the safety instructions and operating manuals for our tools contain extensive instructions on safe

working with power tools, every power tool involves a certain residual risk which can not be completely excluded by safety

mechanisms. Power tools must therefore always be operated with caution !

1 2 3 4 5 6 7 8 9 10 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Draper WTL30 Manuel du propriétaire Page 5

Commentaires sur ces manuels