Draper 59319 Spécifications télécharger pdf (Page 4)

PREPARATION

INSTALLING BATTERIES

1. Remove the screw at the base of the alarm unit and lift

from the bottom of the back cover.

2. Place (4) AA alkaline batteries following the polarity

symbols (+ and –) marked inside the battery

compartment.

3. Replace the alarm unit into the back cover.

NOTES:

• The alarm is disarmed after batteries are installed.

• The unit will beep and the “BATT LOW” indicator lights

when the batteries become weak and need replacing.

For the best performance and longest life, we recommend

that you only use new alkaline batteries and avoid mixing

new and old batteries.

- 3 -

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Draper 59319 Spécifications Page 4