Draper 59319 Spécifications télécharger pdf (Page 7)

- 6-

OPERATION

ARMING ALARM

When leaving the protective area, point the remote

control at the sensor alarm and press the ON (alarm)

button. There will be a short beep, followed by a 30

second delay before the unit is armed. The exit delay

allows you time to leave the protected area without

activating the alarm.

DISARMING ALARM

When returning to the protected area, point the remote

control at the sensor alarm and press the OFF (alarm)

button. Note, there will be a short beep to indicate that

movement has been detected, followed by a 5 second

delay before the siren sounds. The entry delay allows you

time to enter the protected area and deactivate the alarm

before it triggers. Once the alarm is triggered, the siren

will sound for 30 seconds, then automatically reset and go

back to ARMED MODE. If movement continues, the siren

will automatically sound for a further 30 seconds, until the

sensor alarm is disarmed using the remote control.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Draper 59319 Spécifications Page 7