Draper SC1 Manuel d'instructions télécharger pdf (Page 41)

IntelliFlex™ SGC4

The SGC4 (smart group control 4 motors) gives intelligence to standard motors. This intelligence allows you to group shades and run them

from low voltage switching. You may run the SGC4' s from a number of IntelliFlex inputs. Here are some conditions in which you would use

them:

- You want to control shades as a group.

- You want the most cost effective group control that works with low voltage switching.

- You want the controls in an electrical enclosure and to be a UL assembly.

- You want to offer the ability to upgrade the system in the future.

- You want to interface standard motors with a low voltage control system or computer.

SGC4's are not to be used if the following are your conditions.

- You want to use high voltage switching to control the shades.

- You want the controls to be remotely located to reduce wiring.

- You want preset intermediate stops or the ability to regroup shades.

- You want to locate the controls near the shades.

- You do not want to learn how to program a control from an IR remote.

Page 41 of 120

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 119 120

Pas de commentaire

Draper SC1 Manuel d'instructions Page 41